The aesthetics of the Leisure 3 SE is pure luxury and elegance. Two sides of the cabinet can be finished in various precious hardwood and the whole of cabinet surface is finished by hard PE paint, after 14 times manual polishing, burning process with high speed then waxing to high gloss paint surface.

The carpentry and surface finish of the Leisure 3 SE is to furniture grade level. The pyramidal shape of Leisure 3 SE cabinet not only offers visual benefits but also can decrease the resonance and standing waves from the woofer caused at the lowest level. The front baffle with its gentle slope is helpful for vertical diffusing of the ribbon tweeter.

Leisure 3 SE can match with most brand name amplifiers very well and is easily driven. It can breezily exert all of its characters and is suitable for any kinds of music even playing the dynamic sinfonia. In a word, Leisure 3 SE will play any music you expect and present the sound stage with accuracy. Natural, sweet mid-high frequency and deep, clear bass combine to create a unique and truly special performance.

The Leisure S3SE's are ideal for hi-fi and also as the components of a super accurate, high performance home theater system using less costly matching surrounds.

Specifications

• Frequency Response: 48Hz to 40Khz
• Sensitivity: 88 dB/w
• Nominal Impedance: 8 Ohms (6.4 Ohm minimum)
• Power Handling: 50 to 150 Watts
• Tweeter: Model G3Si Aluminum ribbon type - fully shielded design
• Woofer: model AC-165 - 6.5" (165mm) Non-woven carbon fibre and Kevlar cone
• Weight: 12Kg each
• Dimensions: 15.75" x 9.69" x 11.89" (HWD)

Finishes Available:
Reflective Maple, Rosewood, Poplar Burl, Cherrywood, High Gloss Black

Volla is two-way two-unit design with rear port, using the incredible G1 ribbon tweeter. Midwoofer is Aurum Cantus latest AC165/50C2C 6.5" driver, which uses a sandwich cone (NON-WOVEN CARBON FIBER+ CELL2MM + NON-WOVEN CARBON FIBER); copper short-circuit ring is on the core magnet pole with a voice coil of 50mm diameter. The crossover of the Volla is not only very precisely designed but also uses superior M-Cap Supreme series and MKP series capacitors from the German Raimund Mundorf company. Interal connective cable is Classic cable from Swedish SUPRA and 4pcs special-made copper connectors are available for bi-wiring use.

The design of Volla cabinet not only fully addresses the demands for high quality sound performance but also offers the same level of attention to aesthetic concerns. The parabola shaped cabinet structure diminishes undesirable resonance to the lowest evel and also reduces standing waves inside of cabinet. The cabinet surface of Volla is finished by various rare hardwood and high gloss PE paint and burnished by hand over ten times and then polished.

The Volla's sound performance is realistic and natural and that is what most of audio fans strive for. Beautiful tone and abundant details, clear arrangements and broad sound stage, pure and honest voice, excellent dynamics, gorgeous high frequency, mellow and plump mid frequency along with deep and powerful low frequency delivery.

The Volla really is one of the World's best standmount loudspeakers.

Specifications

• Frequency Response: 38Hz to 40Khz
• Sensitivity: 88 dB/w
• Nominal Impedance: 8 Ohms (6.4 Ohm minimum)
• Power Handling: 50 to 200 Watts
• Tweeter: Model G1 Aluminum ribbon type - fully shielded design
• Woofer: Model AC165/50C2C - 6.5" (165mm) Non-woven carbon fibre cone
• Weight: 21Kg each
• Dimensions: 460mm x 245mm x 385mm (HWD)

Finishes Available:
Reflective Maple, Rosewood, Poplar Burl, Cherrywood, High Gloss Black

Everything about the design of Harmony is simply first class. Each and every element of this model is what audiophiles earnestly long for. Parabola-shaped cabinet structure, rare ball-shaped sapele hardwood and high gloss unsaturated polyester resin paint finish, polished more than ten times by hand, the surface is bright, shining and vivid. The tweeter adopts the top of the range G1 aluminum ribbon tweeter, alongside the two 6.5" midrange AC165/50C2C drivers and the single AC200/50C2C 8" woofer.

The crossover design of Harmony is exceptionallty precise and uses the superior M-Cap Supreme MKP capacitor. The inner connective wire is Supra PLY S/3.4 and Classic 2.5. Four specially machined golden-plated copper connectors and golden-plated copper spikes add a rare charm to this incredible speaker.

The sound performance of Harmony is real and natural. Beautiful rhythm, rich details, excellent dynamics and rapid, extended bass all adds up to a practical, stunning and breathtaking floorstanding loudspeaker.

Specifications

• Frequency Response: 30Hz to 40Khz
• Sensitivity: 91 dB/w
• Nominal Impedance: 4 Ohms
• Power Handling: 50 to 350 Watts
• Tweeter: Model G1 Aluminum ribbon type - fully shielded design
• Mid-woofers: Model AC165/50C2C x 2 - 6.5" (165mm) Non-woven carbon fibre cone
• Woofer: Model AC200/50C2C - 8" (165mm) Non-woven carbon fibre cone
• Weight: 60Kg each
• Dimensions: 1200mm x 293mm x 460mm (HWD)

Finishes Available:
Sapele Hardwood, Reflective Maple, Rosewood, Black Walnut, French Sycamore

The cabinet is a Parabola-shaped cabinet structure. Midrange box and woofer box are completely separate. Inner strengthened braces that are made of 25mm MDF are positioned in the woofer box, 5 places in total in order to fully decrease the cabinet resonance and standing waves within the inside of the cabinet.

The thickness of the MDF front baffle is 75mm, the thickness of parabola-shaped side panel is 30mm, the thickness of top plate is 28 abdthe thickness of bottom plate is 84mm.

Standard finish is Ball shaped sapele wood veneer with PE high gloss paint (piano paint). Also available are, rosewood, cherrywood and reflective maple options with 14 layers rigid PE paint finish on the surface of cabinet which are manually polished and then burnished at high-speed, waxing to a sumptuous high gloss finish.

Specifications

• Frequency Response: 32Hz to 40Khz
• Sensitivity: 90 dB/w
• Nominal Impedance: 4 Ohms (4 Ohm minimum)
• Power Handling: 50 to 350 Watts
• Tweeter: Model G1. Aluminum Ribbon type - fully shielded design
• Mid-Woofer: AC-130MK2 - 5.2" (130mm) Non-woven carbon fibre and Kevlar cone
• Woofer: AC-250MK2 - 10" (254mm) Non-woven carbon fibre and Cell2mm and Non-woven carbon fibre sandwich cone
• Crossover Parts: M-cap Supreme MKP series capacitor for crossover of tweeter, M-cap MKP series capacitor for crossover of midrange, and Aurum Cantus polypropylene capacitor for crossover of woofer, 5N copper conductor, metal oxide film resistor and ceramic resistor
• Internal Cable: SUPRA Classic 2.5 cable for tweeter and midrange and SUPRA PLY S/3.4 cable for woofer
• Absorbing Material: Polyester fibre and sponge
• Connections: 18mm Gold-plated binding post, bi-wiring design
• Weight: 72Kg each
• Dimensions: 1412mm x 306mm x 430mm" (HWD)

Finishes Available:
Reflective Maple, Rosewood, Poplar Burl, Cherrywood, High Gloss Black