The Bryston BDA-1 is a state-of-the-art external Stereo DAC (digital to analog converter) using fully discrete Class-A proprietary Bryston analog circuits, two independent linear power supplies and dual Crystal CS-4398 DAC chips. The BDA-1 features an impressive array of inputs for USB, COAX, OPTICAL, AES-EBU and BNC equipped digital devices. For audio outputs, the BDA-1 offers both balanced XLR as well as unbalanced RCA stereo connectors on the rear panel. The BDA-1 is RS-232 software upgradeable, making it the most flexible high performance DAC on the market.

The DAC integrated circuit (chip) provides the conversion of the digital signal to the analog domain. The two independent DAC chip’s used in the BDA-1 are the Crystal CS-4398. Due to the requirements of the conversion process, every DAC chip employs a digital filter to the signal in the digital domain and an analog filter after the conversion process has been applied. Without this upsampling technology, these filters would likely effect frequencies at or near the audible range, accompanied by unwanted level and phase changes. The CS-4398 is a hybrid multi-bit delta-sigma DAC. This is an advanced generation chip, which uses several methods to optimize the conversion process.

This DAC uses a process similar to the previously detailed upsampling process where it oversamples the incoming signal. The CS-4398 operates in one of three oversampling modes based on the input sample rate. Single-speed mode supports input sample rates up to 50 kHz and uses a 128x oversampling ratio. Double-speed mode supports input sample rates up to 100 kHz and uses an oversampling ratio of 64x. Quad-speed mode supports input sample rates up to 200 kHz and uses an oversampling ratio of 32x. This again allows for filtering that is safely out of the audible range. The output of this process is a sensitive analog signal. The timing of this process must be very closely controlled by a low-jitter clock.

The Bryston B-100 SST Integrated Amplifier is without question one of the most sonically transparent and reliable audio products available. It offers performance levels equal to the finest separate audio components.

The B100 SST is a state of the art analog stereo integrated amplifier which utilizes ‘software’ control. The software allows us to provide many more features and functions while still adhering to traditional fully discrete analog circuits throughout the amplifier circuit path.

The B-100 is available with an optional modular plug-in Moving Magnet Phono stage (B-100P) as well as an optional plug in Digital stage (B-100DA) for state of the art PCM Digital playback. Both the MM Phono and the Digital stage are available separately or combined in a single package. Modularity in design allows you to add either of these great options at a later date if required.

Bryston is pleased to introduce the new Bryston 2B-SST C-Series 100 Watt per channel stereo amplifier. The first 2B started life way back in 1979 and has become a Classic among discriminating audiophiles worldwide. This latest version of our 2B incorporates all the new SST circuitry and provides twice the power of our original 2B.

From input to output, all the circuitry in the 2B SST amplifier has been optimized for the most accurate performance possible. The Bryston 2B SST amplifier is a compact, high quality 100 watt per channel, (8 ohms), stereo amplifier intended for use in home sound systems requiring a musically accurate, extremely reliable, no compromise power source.

While the 2B has for years been thought of as an exceptionally lucid and transparent amplifier for traditional two-channel stereo setups, it is now finding additional acceptance in such installations as multimedia surround-sound systems, and in the most ambitious music systems with multi-amplified speakers using electronic crossovers.

The 3B SST stereo amplifier, at 150 watts per channel into 8 ohms and 250 at 4 ohms, provides all the quality and value of our larger amplifiers but in a package which is both compact and powerful. Suitable for a wide range of audio/video systems where sonic accuracy, medium power and long term reliability is required.

Features:

Membrane Power Switch
Soft start circuit on power up
Multiple filter capacitance per channel
Selectable inputs for balanced or single ended (RCA) connectors
Polarity Switch (0 or 180 degrees) on each channel (6B & 9B only)
Remote 12 Volt power trigger input with delayed output feature
Selectable gain settings
Optional 17" Faceplate (no handles) or 19 inch rack mount (with handles) available
Optional Silver or Black Faceplate available

The Bryston 4B SST is something of a legend among audio amplifiers. As the most popular Bryston amp, it has attained international status as an amplifier suitable for the finest and most sophisticated sound systems. Whatever the venue, be it a recording studio stage, a broadcast facility, a home theater installation, or a state-of-the-art stereo system, Bryston has continued to be the number one choice. The 4B SST is a pure dual mono design and offers 300 watts per channel into 8 ohms and 500 watts into 4 with over 1000 watts available in bridged mode.

Features:

Membrane Power Switch
Soft start circuit on power up
Multiple filter capacitance per channel
Selectable inputs for balanced or single ended (RCA) connectors
Polarity Switch (0 or 180 degrees) on each channel (6B & 9B only)
Remote 12 Volt power trigger input with delayed output feature
Selectable gain settings
Optional 17" Faceplate (no handles) or 19 inch rack mount (with handles) available
Optional Silver or Black Faceplate available

The Bryston 6B SST is a single chassis power amplifier consisting of three totally independent amplifier modules, each with its own power transformer and power supply. Each audio channel provides connections for balanced or single ended input and will supply effortless power to the world's most demanding loudspeakers. The 6B SST is a new modular design from Bryston packaged in a convenient single chassis. Each modular channel contains all the electronic circuitry, connections and independent power supply. The chassis simply provides Soft-Start AC to each channel, and a separate power LED illuminates on the front panel indicating individual channel power status. The Byston 6B SST provides 3 X 300 watts per channel at 8 ohms or 3 X 500 watts per channel at 4 ohms. Three completely separate and independent power supplies are employed to prevent any possibility of channel to channel cross-talk or interference.

Features:

Membrane Power Switch
Soft start circuit on power up
Multiple filter capacitance per channel
Selectable inputs for balanced or single ended (RCA) connectors
Polarity Switch (0 or 180 degrees) on each channel (6B & 9B only)
Remote 12 Volt power trigger input with delayed output feature
Selectable gain settings
Optional 17" Faceplate (no handles) or 19 inch rack mount (with handles) available
Optional Silver or Black Faceplate available

The 7B SST is a MONO block design capable of over 600 watts at 8 ohms and over 900 watts at 4 ohms. This gives the 7B ST the power to drive, with breath-taking ease and clarity, speakers, which have been considered "impossible" loads in the past. One advantage of the Mono design 7B SST is it allows you to place the amplifier adjacent to the loudspeaker providing improved performance. The 7B SST is available in either a Series or Parallel version. 'Series' is recommended with loudspeaker loads above 3 ohms and 'Parallel' for loudspeaker loads below 3 ohms.

Features:

Membrane Power Switch
Soft start circuit on power up
Multiple filter capacitance per channel
Selectable inputs for balanced or single ended (RCA) connectors
Polarity Switch (0 or 180 degrees) on each channel (6B & 9B only)
Remote 12 Volt power trigger input with delayed output feature
Selectable gain settings
Optional 17" Faceplate (no handles) or 19 inch rack mount (with handles) available
Optional Silver or Black Faceplate available

The Bryston 9B SST is a hand-crafted, modular, single-chassis 5-channel power amplifier delivering 120 watts per channel at 8 Ohms, and 200 watts at 4 Ohms. Each modular channel contains all the electronic circuitry connections and independent power supply, necessary to deliver the best possible sonic quality. The chassis simply supplies AC and five power LED's on the front panel indicating each channel's functional status, (green for power-on, red for overdrive).

Features:

Membrane Power Switch
Soft start circuit on power up
Multiple filter capacitance per channel
Selectable inputs for balanced or single ended (RCA) connectors
Polarity Switch (0 or 180 degrees) on each channel (6B & 9B only)
Remote 12 Volt power trigger input with delayed output feature
Selectable gain settings
Optional 17" Faceplate (no handles) or 19 inch rack mount (with handles) available
Optional Silver or Black Faceplate available

State of the Art, ultra high powered Dual Mono Amplifier.

The Bryston 14B SST is a balanced-output amplifier which reduces THD and IMD to unprecedented low values, (typically 0.001% or less), for a new degree of transparency, musicality and ease of listening. Superbly low noise floor, typically below - 118dB, yields an inky black silence between notes for hauntingly realistic reproduction. Tremendous power reserves give the 14B SST virtually perfect freedom from overload on any type of speaker or music, bringing the performance and realism directly into your listening environment. The ability to resolve subtle details has to be heard to be believed - it truly sets a new standard.

The Bryston 14B SST employs a total new computer modeled heatsink design maximizing heat dissipation for long-term "fan-free" operation into the most demanding speaker loads.

The Bryston 14B SST is a 2-channel power amplifier consisting of two totally independent amplifier modules, each with its own inde-pendent power transformer equivalent to a +/- 120 Volt power supply. Each audio channel provides connections for balanced or single ended input and will supply a minimum of 500 watts of power into 8 ohms or 800 watts into 4 ohms.

Features:

Available in both 240 Volt 10 Amp version or 120 Volt 15 or 20 Amp versions
Over 100,000 MFD of filter capacitance per channel
Selectable gain Normal Balanced (2V), Balanced plus 6dB (1V), Unbalanced (1V)
Remote 12-Volt power trigger input
Selectable external power-up
Membrane power switch

Click here to download full specifications for the 14B SST